K47 Du Lich

Hoang Thang · Dai tá

NEWS IN ENGLISH

Hoang Thang · Dai tá

The Anglo-Saxons

The term Anglo-Saxon is a relatively modern one. It refers to settlers from the German regions of Angeln and Saxony, who made their way over to Britain after the fall of the Roman Empire around AD 410.

The Roman armies withdrew from Britain early in the fifth century because they were needed back home to defend the crumbling centre of the Empire. Britain was considered a far-flung outpost of little value.

At this time, the Jutes and the Frisians from Denmark were also settling in the British Isles, but the Anglo-Saxon settlers were effectively their own masters in a new land and they did little to keep the legacy of the Romans alive. They replaced the Roman stone buildings with their own wooden ones, and spoke their own language, which gave rise to the English spoken today.

The Anglo-Saxons also brought their own religious beliefs, but the arrival of Saint Augustine in 597 converted most of the country to Christianity.

The Anglo-Saxon period lasted for 600 years, from 410 to 1066, and in that time Britain's political landscape underwent many changes.

'The Anglo-Saxon period stretched over 600 years, from 410 to 1066...'

The early settlers kept to small tribal groups, forming kingdoms and sub-kingdoms. By the ninth century, the country was divided into four kingdoms - Northumbria, Mercia, East Anglia and Wessex.

Wessex was the only one of these kingdoms to survive the Viking invasions. Eric Bloodaxe, the Viking ruler of York, was killed by the Wessex army in 954 and England was united under one king - Edred.

Most of the information we have about the Anglo-Saxons comes from the Anglo-Saxon Chronicle, a year-by-year account of all the major events of the time. Among other things it describes the rise and fall of the bishops and kings and the important battles of the period. It begins with the story of Hengist and Horsa in AD 449.

Anglo-Saxon rule came to an end in 1066, soon after the death of Edward the Confessor, who had no heir. He had supposedly willed the kingdom to William of Normandy, but also seemed to favour Harold Godwinson as his successor.

Harold was crowned king immediately after Edward died, but he failed in his attempt to defend his crown, when William and an invading army crossed the Channel from France to claim it for himself. Harold was defeated by the Normans at the Battle of Hastings in October 1066, and thus a new era was ushered in.

Hoang Thang · Dai tá

Great debate
Since at least the time of the ancient Greeks, there has been considerable debate about exactly how the Egyptians constructed King Khufu's Great Pyramid at Giza.

A reconstruction of a pyramid-worker chiselling stone in a quarry Few texts concerning Egyptian engineering methods have survived the centuries, and in recent years experimental archaeology has been the main means for discovering the methods used for building the structure. Despite this, there are still many questions concerning the quarrying, dressing and transportation of the stone building blocks, let alone the methods by which they were placed meticulously in position. And there are further questions still about how the gigantic edifice was erected on a totally horizontal base, and aligned precisely with the stars.

Hoang Thang · Dai tá

Ladies and gentlement,

I am sure that many of you have hear about the Pyramid. In this section, I would like to quote some main information related to the steps in buiding up a pyramid. They are as follows:

Levelling

Flinders Petrie standing outside a tomb at Giza in which he lived for two years © Between 1880 and 1882, Flinders Petrie, the first truly scientific archaeologist to work in Egypt, undertook some careful survey work on the Giza plateau. This was the site of the pyramid complexes of the rulers Khufu, Khafra and Menkaura - all of whom lived in the Fourth Dynasty.

The results of Petrie's work suggested to him that the Egyptians had levelled the area intended for the Great Pyramid by cutting a grid of shallow trenches into the bedrock, flooding them with water, and reducing the intervening 'islands' of stone to the necessary height.

'...in the 1980s the American Egyptologist Mark Lehner began to produce a meticulous new map of the plateau...'

After this was suggested, for most of the next century, there was surprisingly little archaeological work on the pyramids at Giza, but in the 1980s the American Egyptologist Mark Lehner began to produce a meticulous new map of the plateau, incorporating the various holes and trenches cut into the rock around the pyramids. On the basis of this project, Lehner argued that the Egyptians had in fact not levelled the whole area intended for the pyramids, but had simply ensured that the narrow perimeter strips around the edges of the pyramid were as perfectly horizontal as possible.

-- Edited by Hoang Thang at 21:15, 2005-09-08

Hoang Thang · Dai tá

Aligning

Bronze statue of Imhotep, chief architect to the Third Dynasty King Djoser © Egyptian architects, surveyors and builders are known to have used two specialised surveying tools, the merkhet (the 'instrument of knowing', similar to an astrolabe) and the bay (a sighting tool probably made from the central rib of a palm leaf). These allowed construction workers to lay out straight lines and right-angles, and also to orient the sides and corners of structures, in accordance with astronomical alignments.

It is clear that the Egyptians were using their knowledge of the stars to assist them in their architectural projects from the beginning of the pharaonic period (c.3100-332 BC), since the ceremony of pedj shes ('stretching the cord'), reliant on astronomical knowledge, is first attested on a granite block of the reign of the Second-Dynasty king Khasekhemwy (c.2650 BC).

A reconstruction of an alignment ceremony

Reconstruction of an official ceremony in which the pyramid is aligned to the stars This pedj shes ceremony relied on sightings of the Great Bear and Orion constellations, aligning the foundations of the pyramids and sun temples very precisely with the north, south, east and west. They usually achieved this with an error of less than half a degree. In later periods, the process of stretching the cord continued to be depicted in texts and in the reliefs of temples such as that of Horus, at Edfu, but it appears to have gradually become just a ritual, since these temples were aligned less precisely than the earlier ones, often simply with reference to the direction of the river.

How did this astronomically based surveying work in practice? The British Egyptologist IES Edwards argued that true north was probably found by measuring the place where a particular star rose and fell in the west and east, then bisecting the angle between these two points. More recently, however, Kate Spence, an Egyptologist at the University of Cambridge, has put forward a convincing theory that the architects of the Great Pyramid sighted on two stars (b-Ursae Minoris and z-Ursae Majoris), rotating around the position of the north pole, which would have been in perfect alignment in around 2467 BC, the precise date when Khufu's pyramid is thought to have been constructed. This hypothesis is bolstered by the fact that inaccuracies in the orientations of earlier and later pyramids can be closely correlated with the degree to which the alignment of the two aforementioned stars deviates from true north.

Hoang Thang · Dai tá

Ramps

'...a system of ramps must have been used to drag the millions of blocks into their positions in the various pyramids.'

Most archaeologists agree that a system of ramps must have been used to drag the millions of blocks into their positions in the various pyramids. No such ramps have actually survived at the Great Pyramid itself, but enough traces can be seen around some of the other Old Kingdom pyramids to suggest that at least five different systems of ramp might have been used.

The Meidum Pyramid © The most straightforward method would have been the so-called linear ramp, probably used in the Third-Dynasty pyramid of Sekhemkhet, at Saqqara. Such ramps, however, were probably rarely used, because they would have had to be very wide. An alternative would have been the 'staircase ramp', a steep and narrow set of steps leading up one face of the pyramid, traces of which have been found at the Sinki, Meidum, Giza, Abu Ghurob and Lisht pyramids.

In the case of the 'spiral ramp' (perhaps described in the Nineteenth-Dynasty Papyrus Anastasi I), the question arises of what it would have rested on, and how corrective calculations and checks could have been made from the corners if most of the pyramid was continually covered up. The 'reversing ramp', a zigzag course up one face of a pyramid, would probably have been most effective for the construction of step pyramids, although, frustratingly, there are no signs of its use on the step pyramids at Saqqara, Sinki and Meidum.

'...the causeways stretching from pyramid to valley temple might originally have served as builders' ramps from quay to construction site...'

Traces of 'interior ramps' have survived inside the remains of the pyramids of Sahura, Nyuserra and Neferirkara, at Abusir, and of Pepi II, at Saqqara, but some kind of exterior ramp would still have been needed after the interior was filled in. The terraced nature of the pyramid core would often have made it more convenient to use a series of much smaller ramps built along the sides of the pyramid from step to step. The remains of these would no doubt have been lost when the outer casing was applied. It is also possible that the causeways stretching from pyramid to valley temple might originally have served as builders' ramps from quay to construction site (the quay being connected with the Nile by canal).

Hoang Thang · Dai tá

Raising blocks

Experts have also talked a lot about the methods by which individual stone blocks were raised into position. Since the Egyptians made no use of block and tackle methods, or cranes, it is usually assumed that wooden and bronze levers were used to manoeuvre the blocks into position.

'...it is usually assumed that wooden and bronze levers were used to manoeuvre the blocks into position.'

The level of structural engineering was incredibly high in the internal chambers of the Great Pyramid. Indeed, the roof of the so-called Grand Gallery was the Egyptians' earliest attempt at corbel-vaulting on a colossal scale. The architects surmounted particularly difficult logistics in the creation of the corridor leading up to the main burial chamber of the Great Pyramid (the so-called King's Chamber). The corridors in other pyramids are all either level or sloping downwards, whereas this one slopes steeply upwards, which would have presented problems when it came to blocking the passage with granite plugs, after the king's body had been placed in the chamber.

It is clear from the fact that the plugs in this 'ascending corridor' are an inch wider than the entrance that the plugs must have been lowered into position not from the outside, as was usually the case, but from a storage position within the pyramid itself (perhaps in the Grand Gallery). It is also clear that the design had to allow the workmen who pushed the plugs into position to be able to escape down a shaft leading from the Grand Gallery to the 'descending corridor', through which they could exit.

Hoang Thang · Dai tá

Quarrying

Pink granite from the pyramid of Khafra at Giza © The King's Chamber was made entirely from blocks of Aswan granite. Since the Second Dynasty, granite had frequently been used in the construction of royal tombs. The burial chambers and corridors of many pyramids from the Third to the Twelfth Dynasty were lined with pink granite, and some pyramids were also given granite external casing (eg those of Khafra and Menkaura, at Giza) or granite pyramidia (cap-stones).

'...around 45,000 cubic metres of stone were removed from the Aswan quarries during the Old Kingdom...'

The Aswan quarries are the only Egyptian hard-stone workings that have been studied in detail. It has been estimated, on the basis of surviving monuments, that around 45,000 cubic metres of stone were removed from the Aswan quarries during the Old Kingdom (Third to Sixth Dynasties). It seems likely that loose surface boulders would have been exploited first.

It is unclear what kinds of tools were used for quarrying during the time of the pharaohs. The tool marks preserved on many soft-stone quarry walls (eg the sandstone quarries at Gebel el-Silsila) suggest that some form of pointed copper alloy pick, axe or maul was used during the Old and Middle Kingdoms, followed by the use of a mallet-driven pointed chisel from the Eighteenth Dynasty onwards. This technique would, however, have been unsuitable for the extraction of harder stones such as granite. As mentioned above, Old Kingdom quarriers were probably simply prising large boulders of granite out of the sand.

Hoang Thang · Dai tá

Cutting blocks

A quarry floor showing quarrying marks made by the ancient Egyptians © There has been much debate concerning the techniques used by ancient Egyptians to cut and dress rough-quarried granite boulders or blocks for use in masonry. No remnants of the actual drilling equipment or saws have survived, leaving Egyptologists to make guesses about drilling and sawing techniques on the basis of tomb-scenes, or the many marks left on surviving granite items such as statues.

'...copper alloy drills or saws would have worn away rapidly if used to cut through granite without assistance.'

In recent years, however, a long series of archaeological experiments has been undertaken by the British Egyptologist Denys Stocks. Like many previous researchers, Stocks recognised that the copper alloy drills or saws would have worn away rapidly if used to cut through granite without assistance. He therefore experimented with the addition of quartz sand, poured in between the cutting edge of a drill and the granite, so the sharp crystals could give the drill the necessary 'bite' into the rock, and found that this method could work. It seems a practical solution, as no special teeth would have been needed for the masons' tools, only a good supply of desert sand - and this theory is gaining acceptance in academic circles.

'...there is still a great deal that remains mysterious about the basic structure of pyramids...'

As the recent robotic explorations of the so-called air-shafts in the Great Pyramid have demonstrated, there is still a great deal that remains mysterious about the basic structure of pyramids, and the technology that created them. If we are to gain a better understanding of pyramid-building, the best way seems to be a blend of detailed study of the archaeological remains and various kinds of innovative experimental work. Above all, this is the kind of research that relies on collaboration between Egyptologists and specialists in other disciplines, such as engineering, geology and astronomy.